Mule Blocks - 12 Series

Mule Block
- Used to divert the cables around obstructions or change direction of travel.
- ASTM Class 30 grey iron sheave.
- Sealed precision ball bearings or tapered roller bearings.
- 7 gauge side plates fully enclose sheave.
- Base made from 8" structural steel channel.
- Four spacers between the side plates prevent cables from escaping the sheave grooves.
- Mule blocks must be welded in place after final alignment - consult the factory for specific information.
| Ordering Information | |||||
|
Sheave Diam. |
Lines | Bearings |
Cast
Iron Prod. Code |
RWL | Wt. |
| 8-5/8" | 1 | 17mm BB | 5C2-10812C | 30 lb | |
| 8-5/8" | 2 | 17mm BB | 5C2-20812C | 31 lb | |
| 8-5/8" | 1 | 17mm TRB | 5C3-10812C | 30 lb | |
| 8-5/8" | 2 | 17mm TRB | 5C3-20812C | 31 lb | |
| 8-5/8" | 4 | 1" TRB | 5C3-40812C | 49 lb | |
| 8-5/8" | 8 | 1" TRB | 5C3-80812C | 56 lb | |
| na | na | ||||
| 12" | 1 | 1" TRB | 5C3-11212C | 50 lb | |
| 12" | 2 | 1" TRB | 5C3-41212C | 50 lb | |
| 12" | 8 | 1" TRB | 5C3-81212C | 74 lb | |




