Search:
Design, Manufacture and Installation of Theatrical Equipment Worldwide
CONTACT US    SITE MAP
315-451-3440
800-836-1885

Universal Loft Block 55 / 56 / 59 Series

Universal Loft Block
Universal Loft Block
200-10856N25
56 series

  • May be mounted upright or underhung.
  • May be supported by I-beams, grid wells, or Unistrut™.
  • Nylon or ASTM Class 30 grey iron sheaves are available. Nylon sheaves are quieter, have a higher capacity, lower weight, and lower cost than blocks with cast iron sheaves.
  • 8" blocks have a 24" base angle with a continuous pattern of holes and slots for universal mounting for a grip range up to 20". Multi-line block base angles have a series of mounting holes.
  • 8-Line blocks have the base angles turned in, requiring different upright and underhung models.
  • A clip package is available for single line blocks with a combination of J-bolts and clips for both underhung, and upright mounting options.
  • Sealed precision ball bearings (Single line, 8" nominal sheave only) or tapered roller bearings
  • Side plates fully enclose sheave.
  • Five spacer between the side plates, three of which prevent cables from escaping the sheave grooves
  • Pivot adapters (070-PIVOT) are available for single line 8" blocks used in applications where the mounting surface is sloped.
  • Underhung loft blocks may need to be welded to loft beams after final alignment - consult the factory for specific information.

Ordering Information
Sheave
Diam.		   Lines   Bearings   Cast Iron
Prod. Code		   RWL   Wt.   Nylon
Prod. Code		   RWL   Wt.
Cable Blocks (1/4" (6.35 mm) cable)
8-1/2"
216 mm		   1   17mm BB   200-10855C25   500 lb
227 kg		   20 lb
9 kg		   200-10856N25   750 lb
340 kg		   15 lb
6.8 kg
8-1/2"
216 mm 		  2   17mm BB   200-20855C25   700 lb
317 kg 		  20 lb
9 kg 		  200-20855N25   750 lb
340 kg 		  16 lb
7.25 kg
8-1/2"
216 mm 		  1   17mm TRB   200-10856C25T   500 lb
227 kg 		  20 lb
9 kg 		  200-10856N25T   750 lb
340 kg 		  15 lb
6.8 kg
8-1/2"
216 mm 		  2   17mm TRB   200-20855C25T   700 lb
317 kg 		  20 lb
9 kg 		  200-20855N25T   750 lb
340 kg 		  16 lb
7.25 kg
8-1/2"
216 mm 		  4   1" TRB
25.4 mm 		  200-40855C25   1300 lb
590 kg 		  40 lb
18 kg 		  200-40855N25   1300 lb
590 kg 		  31 lb
14 kg
8-1/2" Upright
216 mm 		  8   1" TRB
25.4 mm 		  200-80855C25   1300 lb
590 kg 		  52 lb
23.5 kg 		  200-80855N25   1300 lb
590 kg 		  32 lb
14.5 kg
8-1/2" Underhung
216 mm		   8   1" TRB
25.4 mm 		  200-80859C25   1300 lb
590 kg 		  52 lb
23.5 kg 		  200-80859N25   1300 lb
590 kg 		  32 lb
14.5 kg
8-1/2" Upright
216 mm		   10   1" TRB
25.4 mm 		  200-100855C25   1300 lb
590 kg 		  55 lb
25 kg 		  -   1300 lb
590 kg 		  33 lb
15 kg
8-1/2"Underhung
216 mm		   10   1" TRB
25.4 mm 		  200-100859C25   1300 lb
590 kg 		  55 lb
25 kg 		  -   1300 lb
590 kg 		  33 lb
15 kg
12"*
305 mm		   1   1" TRB
25.4 mm 		  200-11255C25   700 lb
317 kg 		  50 lb
22.7 kg 		  -   -   -
12"
305 mm		   2   1" TRB
25.4 mm 		  200-21255   1400 lb
634 kg 		  50 lb
22.7 kg 		  -   -   -
12" Upright
305 mm		   8   1" TRB
25.4 mm 		  200-81255C25   3000 lb
1361 kg 		  74 lb
33.5 kg 		  -   -   -
12" Underhung
305 mm		   8   1" TRB
25.4 mm 		  200-81259C25   2500 lb
1134 kg 		  74 lb
33.5 kg 		  -   -   -
16"+
406 mm		   1   1" TRB
25.4 mm 		  200-11655S38   1400 lb
634 kg 		  110 lb
50 kg 		  -   -   -
Cable Blocks (3/16" (4.76 mm) cable)
8-1/2"
216 mm 		  1   17mm BB   -   -   -   200-10855N19   500 lb
317 kg 		  15 lb
6.8 kg
8-1/2"
216 mm 		  1   17mm TRB   -   -   -   200-10855N19T   500 lb
317 kg 		  15 lb
6.8 kg
8-1/2"
216 mm		   8   1" TRB
25.4 mm 		  -   -   -   200-80855N19   1300 lb
590 kg 		  28 lb
12.7 kg
8-1/2"
216 mm		   8   1" TRB
25.4 mm 		  -   -   -   200-80859N19   1300 lb
590 kg 		  28 lb
12.7 kg
Rope Block (3/4" (19 mm) rope)
8"
203 mm		   1   17mm BB   200-10855C75   300 lb
136 kg 		  20 lb
9 kg 		  200-10855N75   300 lb
136 kg 		  15 lb
6.8 kg
8"
203 mm		   1   17mm TRB   200-10855C75T   300 lb
136 kg 		  20 lb
9 kg 		  200-10855N75T   300 lb
136 kg 		  15 lb
6.8 kg

* Available for 1/4" (6.35 mm) or 3/8" (9.5 mm) cable, specify. (RWL for 1/4" (6.35 mm) groove 700 lbs. (317 kg), for 3/8" (9.5 mm) groove 1050 lbs. (476 kg))
+ Steel sheave, available for 3/8" (9.5 mm) or 1/2" (12.7 mm) cable, specify.
 
RWL: RWL is maximum load that can be applied to a block which is in "like new" condition and has been properly installed, maintained and operated.
 
EQUIPMENT
Control Systems
Automated Rigging
Manual Rigging
Rigging Accessories
Fire Safety Curtains
Acoustic Structures,
Stage Machinery
& Custom Solutions
How to Buy
Our Extraordinary Guarantee
Service, Repair,
& Inspections
Sign up to receive RIGGING REPORT E-NEWS
IN THE NEWS
Join us on FACEBOOK
QUESTIONS? E-mail us now!
7041 Interstate Island Road | Syracuse, NY USA 13209-9713 | Phone: 315-451-3440 | Toll Free: 800-836-1885
Privacy Policy