Battens and Truss Battens

Battens are made from seamless pipe and are supplied with a matte black finish
Battens up to 21′ (6.4 m) long are supplied as a single piece; longer battens are provided with 18″ (457 mm) long internal splice sleeves
Standard 1 1/2″ (38 mm) battens are provided with safety yellow vinyl end caps, making the batten ends easier to see
Two pipe ladder trusses are constructed from two 1 1/2″ (38 mm) sch 40 pipes with flat bar spacers on 4′ (1219 mm) centers. Other special constructions are available, consult factory.

Product Code	Description	I.D.	O.D.	Weight
015-67R	1-1/2″ (38.1 mm) Sch 40 batten	1.610″ (40.89 mm)	1.900″ (48.26 mm)	3 lb / ft (4.5 kg /m)
015-67H	1-1/2″ (38.1 mm)Sch 80 batten	1.500″ (38.1 mm)	1.900″ (48.26 mm)	4 lb / ft (5.95 kg /m)
015-68R	2″ (50.8 mm)Sch 40 batten	2.067″ (52.50 mm)	2.375″ (60.33 mm)	4 lb / ft (5.95 kg /m)
015-69R	2-1/2″ (63.5 mm) Sch 40 batten	2.469″ (62.71 mm)	2.875″ (73.03 mm)	6 lb / ft (8.93 kg /m)
015-67T	Two pipe truss batten	1.610″ (40.89 mm)	1.900″ (48.26 mm)	7 lb / ft (10.42 kg /m)
015-67S	1-1/2″ (38.1 mm) Batten sleeve, no holes, 18″ long	–	–	3 lbs. (1.4 kg)
015-68S	2″ (50.8 mm) Batten sleeve, no holes, 18″ long	–	–	4 lbs. (1.8 kg)
015-69S	2-1/2″ (63.5 mm) Batten sleeve, no holes, 18″ (457 mm) long	–	–	9 lbs. (4.1 kg)
099-BATCAP	Yellow batten end caps, 4″ (101.6 mm) long	N/A	N/A	0.1 lb (0.05 kg)

Please call your Wenger | J.R. Clancy representative so we can thoroughly understand your needs in order to provide the best solution and estimate.