J-Guide™ System

Overview

Our J-Guide™ System is a lightweight aluminum guide system for counterweight arbors. The adjustable wall knees allow simple, on-site adjustment to meet field conditions.

Key Benefits

• Benefit #1
• Benefit #2
• Benefit #3
• Benefit #4

Features

• 1-1/2″ x 1-3/4″ x 3/16″ (38 x 45 x 5 mm) guide
• Averages 40% less time to install than steel T-bar
• 6″ (152 mm) and 8″ (203 mm) centers are standard, other centers are available
• J-Guide systems supplied complete with required J-Guide, wall battens, stop battens, splices, adjustable wall knees, bolts, nuts and washers
• Vertical J’s are connected to wall battens with self-aligning clamps, for fast installation. Horizontal wall battens and stop battens are pre-punched 1-3/4″ x 1-3/4″ x 3/16″ (45 x 45 x 5 mm) steel angle, with holes on 2″ (51 mm) centers. These allow simple adjustment of guide location to accommodate field conditions.
• Optional 2″x 2″ (51 x 51 mm) hardwood or hardwood with neoprene bumpers are available for stop battens.

Options

Product Code	Type	Weight
012-1650	J-Guide System, natural finish	3 lb/ft (4.5 kg/m)
012-1650B	J-Guide System, black anodized finish	3 lb/ft (4.5 kg/m)
112-1H	2″x 2″ Hardwood stop batten	3 lb/ft (4.5 kg/m)
112-1N	2″x 2″ Hardwood stop batten with 1/4″ Neoprene	4 lb/ft (4.5 kg/m)