Wire Guide Locking Rail

Overview

The Wire Grid Locking Rails mount to the stage floor and support the rope locks and index cards used to identify sets.

Key Benefits

• Benefit #1
• Benefit #2
• Benefit #3
• Benefit #4

Features

• Two angles are provided to support 855M floor blocks
• Rope locks and index cards are mounted on a 3″ x 5″ x 1/4″ (76 x 127 x 6 mm) formed, pre-punched steel angle
• Built to withstand a 500 lb (226.8 kg) per linear foot up load (RWL)
• Numbered index cards with a safety warning are included. These can be written on using erasable marker or grease pencil.
• A 4″ (102 mm) channel is provided as a lower bumper for counterweight arbors
• Mounts to the stage floor. Mounting method must be able to withstand the imposed load
• Mounting stanchions are located on 5′ (1524 mm) maximum centers and made from 1/2″ x 3″ (13 x 76 mm) flat bar and 3″ (76 mm) channel
• Double Purchase locking rails include 5/16″ (8 mm) anchor shackles for hand line tie-offs

Options

Product Code	Type	Set Centers	Weight
011-518R6	Single Purchase	6″ (152 mm)	31 lb / ft (46 kg/m)
011-518R8	Single Purchase	8″ (203 mm)	31 lb / ft (46 kg/m)
011-518D6	Double Purchase	6″ (152 mm)	31 lb / ft (46 kg/m)
011-518D8	Double Purchase	8″ (203 mm)	31 lb / ft (46 kg/m)

RWL: RWL is maximum load that can be applied to a block which is in “like new” condition and has been properly installed, maintained and operated.